2. INSTALLATION AND
PREPARATION FOR USE
WARNING : This appliance must be
installed by an authorised service
person or qualified technician, according to
the instructions in this guide and in
compliance with the current local
regulations.
•
Incorrect installation may cause
harm and damage, for which the
manufacturer accepts no responsibility
and the warranty will not be valid.
•
Prior to installation, ensure that the local
distribution conditions (electricity voltage
and frequency) and the adjustments
of the appliance are compatible. The
adjustment conditions for this appliance
are stated on the label.
•
The laws, ordinances, directives and
standards in force in the country of use
are to be followed (safety regulations,
proper recycling in accordance with the
regulations, etc.).
•
If the product contains removable shelf
guides (wire racks) and the user manual
includes recipes like yoghurt, the wire
racks shall be removed and the oven
operated in the defined cooking mode.
Removal of the Wire Shelf information
is included in the CLEANING AND
MAINTENANCE section.
2.1 inStruCtionS for the inStaller
General instructions
•
After removing the packaging material
from the appliance and its accessories,
ensure that the appliance is not
damaged. If you suspect any damage,
do not use it and contact an authorised
service person or qualified technician
immediately.
•
Make sure that there are no flammable
or combustible materials in the close
vicinity, such as curtains, oil, cloth etc.
which may catch fire.
•
The worktop and furniture surrounding
the appliance must be made of
materials resistant to temperatures
above 100°C.
•
If a cooker hood or cupboard is to be
installed above the appliance, the safety
distance between cooktop and any
cupboard/cooker hood should be as
shown below.
Minimum
42 cm
The appliance should not be installed
directly above a dishwasher, fridge, freezer,
washing machine or clothes dryer.
2.2 inStallation of the applianCeS
The appliances are supplied with
installation kits and can be installed in a
worktop with the appropriate dimensions.
The dimensions for hob and oven
installation are given below.
Installation dimensions for hotplate hob
A1 (mm)
B1 (mm)
C1 (mm)
D1 (mm)
Installation dimensions for vitroceramic
hob
A1 (mm)
B1 (mm)
C1 (mm)
D1 (mm)
Installation dimensions for oven
A2 (mm)
557
B2 (mm)
550
C2 (mm)
595
D2 (mm)
575
I2(mm)
25
EN - 10
HOB
580
E1 (mm)
510
min. F1 (mm)
40
min. G1 (mm)
560
E1 (mm)
590
520
min. F1 (mm)
41
min. G1 (mm)
560
E2 (mm)
min. F2 (mm)
min. G2 /J2 (mm)
H2 (mm)
Minimum
42 cm
490
50
50
490
50
50
574
560-580
555/5
600