Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly:
∙ The motor base should be wiped with a damp cloth. All other parts can be rinsed
and dryed.
Attention: In the sieve are sharp knives!
∙ Ensure that the switch on the motor base if set to „Off", the speed is set to „Soft"
and the appliance is not connected.
∙ Place the filter basket in the collection bowl and carefully press down the filter bas-
ket at the edges until it audibly engages on the drive and does not wobble.
∙ Place the filling cover onto the juice collection bowl and flip the catches down-
wards. Ensure that the pulp ejector is against the outflow when doing this
∙ Ensure that the locking bow is tightly closed.
∙ Lead the pulp container under the pulp ejection, place vertically and put into place.
Hint: For a more easy cleaning of the pulp container put a small plastic bag inside
to collect the pulp.
∙ Place the juice jug under the spout.
Then plug in the appliance.
Usuage:
∙ Move the on/off switch to „on".
∙ When the device is being used for the first time, the motor may briefly generate a
slight odour.
∙ Speed control (LCD display):
∙ Setting 1 Soft fruits with high water content
∙ Setting 2 Soft fruits and citrus fruits
∙ Setting 3 Citrus fruits
∙ Setting 4 Pineapples and apples
∙ Setting 5 Pineapples, apples and vegetables
∙ Put the food from which the juice is to be extracted into the filling funnel with the
motor running.
∙ Never put food with hard seeds or shells into the filling tunnel, since this may da-
mage the blades.
∙ Press the pusher slowly, without force down. Never use any other appliances or put
fingers into the feeding opening. Risk of injuries!
∙ After the last filling let the appliance work for some seconds, that the juice can
drop out of the spout.
∙ Do not overfill the pulp container, as this can cause problems during usage or even
demage the appliance.
16
Advertenties
Inhoudsopgave
