Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
English
32
Switching the Device on/off (3)
Switch the device to the standby mode with the POWER
button (the time is displayed). If this button is pressed once
more, the device switches on again.
TUNE+/TUNE- control (11)
The TUNE control is used for different settings.
NOTE:
The TUNE control is a push switch. Turn the push switch
until a "click" can be heard. Hold it down in the respec-
tive direction of rotation until the desired setting has been
made.
Setting of the Clock (in Standby Mode)
(11).
1. Press the SET button (5). You can now adjust the settings
for the minutes, hours and the display format (24 Hr or
12 Hr) in turn.
NOTE:
"PM" will show for afternoons in the 12 hour display.
Setting the date (in standby mode)
(11).
1. Select the date display by pushing the MODE button (4).
The year display shows in the year indicator (YEAR).
2. Press the SET button (5). You can now consecutively ad-
just the settings for the date (DATE), the month (MONTH),
and the year (YEAR). The setting for the weekdays
changes automatically.
MO = Monday, TU = Tuesday, WD = Wednesday,
TH = Thursday, FR = Friday,
SA = Saturday, SU = Sunday
Changing the display indicator
With the MODE button (4), you can toggle between the date
and the time indicator or between the date and the year.
Headphone jack (13)
For headphone operation, use a headphone set with a
3.5 mm stereo jack plug plugged into the
The speakers are switched off.
Volume adjusting
The desired volume can be sent using the VOLUME regula-
tor (1).
All manuals and user guides at all-guides.com
Display brightness
The backlight of the display will automatically turn off be-
tween 11pm and 5 am.
Listening to the radio
The preset stations will be lost if the power is interrupted.
Scanning stations
Presetting radio stations
The device can preset up to 30 radio stations. To preset a
station, follow the steps below:
1. Search for a station as described in "Scanning stations".
2. Press the SET button (5). The display will show MEMORY
3. Use the MEM UP (9) and MEM DN (8) buttons to choose
4. Press the SET button again. The station will be preset.
Recalling preset radio stations
1. Choose the preset location with the MEM UP (9) and
Automatic station scan
the device will start the automatic station scan searching the
entire frequency range automatically for stations. The stations
found will be stored on the preset locations 1-30 in ascending
order.
headphone jack.
Setting the Alarm Time
You can set up to two alarms. As follows:
1. Press the ALARM button (10), - - : - - ALM1 appears on
NOTE:
trol (11). If you keep the control pressed in one direction,
station. The display will show the respective frequency.
improve the reception by rotating, winding or unwinding
the wire antenna.
the preset location for the corresponding station.
The MEMORY indicator and the preset location will
disappear.
MEM DN (8) buttons.
NOTE:
been filled.
the display. If you push the ALARM button once more,
- - : - - ALM2 will appear in the display.
-
Advertenties
Inhoudsopgave
