Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Thus, when the water full alarm occurs, please drain the water in the water tray. Remove the cover and then
the rubber stopper from the drain port at the bottom of the unit, and drain out the water.
Continuous drainage
Continuous drainage can be used to avoid the water full alarm disturbance. Prepare a drain hose. Connect it to
the drain port at the middle of the unit and drain water into a bucket or floor drain. The unit can also work
well.
-
If you plan to leave this unit unused for a long time, please use both of the drain ports to drain out the
water.
-
If the condensed water accumulates fast and leads to water full alarms shortly, the splash motor inside the
machine may be damaged. In this case, please contact our service department at www.emerio.eu/service
Wi-Fi CONNECTION GUIDE (This guide for the APP may not be up to date due to software version upgrade or
other reasons. This instruction is used as a guide only. Below mobile phone interface uses English version in
iOS as an example.):
1. Search "Smart Life" in App Store (for iOS) or Google play (for Android) to download the application.
2. Sign up or log in to your account on the APP. Tap the "+" at top right corner or button "Add Device" to add
your device. (Fig.1)
3. Find "Large Home Appliances" and tap the icon "Air Conditioner (Wi-Fi)". (Fig.2)
You will get the prompt that asks you to use 2.4 GHz Wi-Fi network and enter password. (Fig.3) Tap "Next"
to get Fig.4.
Note: When setting up Wi-Fi function you need to select an available 2.4 GHz network and connect the
appliance. Your mobile needs to be connected to the same network in order to set up Smart Life in the
phone. When this is done you can access the appliance from your phone on any network.
There are two ways to do the net pairing. Press and hold the wind speed button on the control panel for
approx. 5 seconds until a beep sound is heard, the Wi-Fi indicator light will blink quickly (way 1). Continue
to press and hold the wind speed button for another 5 seconds until a beep sound is heard, the Wi-Fi
indicator light will blink slowly (way 2).
It is recommended to use way 1; if failed please use way 2.
Way 1:
1) Press and hold the wind speed button for approx. 5 seconds until a beep sound is heard and the Wi-Fi
indicator light blinks quickly.
2) Tap "Confirm the indicator is blinking" in Fig.4. You will get Fig.5 that asks you to select the status of
the indicator light. Tap "Blink Quickly".
3) Wait until you get Fig.7 and then tap "Done".
4) Now you can operate your device in the control interface. Tap buttons to set your appliance.
Way 2:
1) Press and hold the wind speed button for approx. 5 seconds until a beep sound is heard and the Wi-Fi
indicator light blinks quickly. Continue to press and hold the wind speed button for another 5 seconds
until a beep sound is heard and the Wi-Fi indicator light blinks slowly.
2) Tap "Confirm the indicator is blinking" in Fig.4. You will get Fig.5 that asks you to select the status of
the indicator light. Tap "Blink Slowly".
- 7 -
Advertenties
Inhoudsopgave
