Descaling; Possible Causes; Cleaning And Maintenance - babymoov Nutribaby+ Gebruikshandleiding
Verberg thumbnails
Zie ook voor Nutribaby+:
- Gebruikershandleiding (91 pagina's) ,
- Gebruikshandleiding (91 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DESCALING
When the Nutribaby + has been used for a certain period of time, mineral deposits may form on the heating unit and damage it.
Thus, the icon
(2.1.) will be displayed on the control panel.
You should descale the water tank regularly (every 50 cycles), pouring 100 ml of hot water and 100 ml of white vinegar. Let it
sit for one or two hours (or more if necessary), without plugging in the apparatus. Pour off the mixture and wipe of inside of the
tank and the heating unit with a wet cloth.
Once the operation is completed, hold down OK for 5 seconds to make the icon
Limescale may also be removed using limescale removers designed for food products (citric acid based).
N.B.: 50 cycles is an average estimate. Descaling may need to be carried out more often if the water used has a high mineral
content ("hard water").
PROBLEMS
The blending jug is not working
The
symbol is lit up
The
symbol is lit up
The product stops before
finishing the cooking, sterilising
or heating cycle
The blending unit has suddenly
stopped
REUSABLE ISY POUCHES
RECOMMENDATIONS FOR USE
Before using for the first time place reusable pouches in boiling water for 5 minutes, then leave to dry and cool before use.
Ensure the ring is screwed on correctly to avoid potential leaks. Before each use, examine the product. Throw it away as soon
as any deterioration or fragility becomes evident.
CLEANING AND MAINTENANCE
Before first use, disassemble and clean the product and then place the components in boiling water for 5 min. This is to ensure
hygiene. Before each subsequent use clean carefully to ensure hygiene. Ensure that all parts including areas which may not be
visible but where food has passed through are thoroughly washed and flushed with clean water to remove any food residues.
Dismantle the bottle entirely after each use and clean all the accessories thoroughly (lid, ring, etc) in soapy water. During
cleaning, take care to remove the plastic part under the lid and wash it carefully. Take care to put it back properly after cleaning
to prevent any leakage. Do not use abrasive or aggressive products such as detergents. Rinse thoroughly in clean water and dry
the bottle and accessories carefully. Dishwasher-proof. The item may become opaque over time and the bottle's decorations
may degrade. If they are not being used, store them in a clean, dry place away from direct sunlight and heat sources.
FOR YOUR CHILD'S SAFETY AND HEALTH - WARNING!
Do not use for baby milk. Not suitable for breast milk. Continuous and prolonged sucking of fluids will cause tooth decay. Always
check food temperature before feeding. Keep components not in use out of the reach of children. Throw away at the first signs
of damage or weakness. Never attach to cords, ribbons, laces or loose parts of clothing. The child may be strangled. Always use
this product with adult supervision. Accidents have occurred when babies have been left alone with drinking equipment due to
the baby falling or if the product has disassembled. Tooth decay in young children can occur even when non-sweetened fluids
are used. This can occur if the baby is allowed to use the bottle/cup for long periods through the day and particularly through
the night, when saliva flow is reduced or if it is used as a soother.
NUTRIBABY + / ISY POUCHES x 15 • Instructions for use
POSSIBLE CAUSES
The connector is not pulled out and
connected to the blending unit.
The blades are not turning.
The blending jug lid is not
positioned correctly.
The
symbol lights up automatically
after 50 heating cycles.
The steaming unit has run out of water.
Limescale build-up.
The fuse or heat protection is activated
(this applies to most models).
(2.1.) disappear.
SOLUTION
Pull out the connector and connect it to the
blending unit by placing it on top.
Contact the after-sales service. We may need
to exchange your blending unit.
Check whether the lid is positioned correctly
on the blending jug. If the lid is positioned
correctly but blending will still not start, please
contact our customer service department.
Press the OK button for 5 seconds. If the
ymbol stays on, you will need to RESET.
To reset, press the 2 arrows and the ON/OFF
button at the same time.
Press the OK button for 5 seconds and add
water. If the
symbol stays on, you will need
to RESET.
To reset, press the 2 arrows and the ON/OFF
button at the same time.
See the 'CARE AND CLEANING' section in
the instruction manual for how to descale the
product using water and vinegar.
Let the product cool down for a few moments.
Add liquid to the blending jug and blend again.
If the product still does not work after that,
please contact our after-sales service.
EN
17
Advertenties
Inhoudsopgave
