Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
Problem
Possible reason
Lid foil roll is not positioned correctly.
The roll of foil is not matched to the material
from which the container is made.
The appliance
does not seal the
Too low temperature
foil to the edge
Too short welding time
of the container
or the seal is too
The matrix is inverted (with silicone stripes fac-
es down)
weak
Lack of silicone stripes on matrix
There is a gap in the pressure line of the sili-
cone strip.
The power cord is not connected to the
power supply, or the machine is not turned
The appliance
on.
does not start
Blown fuse.
The knife is missing or damaged.
Sealing foil is not
cut off.
Technical data
Item no.
Dimensions (Appliance)
Dimensions (Roll)
Tray dimensions
Efficiency
Max. Power
Voltage
Fuse
Indicators
Sealing technology
Properties
Net weight
976722
637x258x(H)247 mm
Ø160 x (max) 200 mm
195x250x(H)10 mm
8-10 cycles/min
700 W
AC ~230V 50Hz
5x20 delayed 3,15 A
Turning On light + Heating plate indicator light
Heating plate with a non-stick coating with manually adjustable temperature
- Stainless steel construction, quick matrix change for containers,
- safe and stable temperature control system,
- the possibility of using matrices adapted to the individual needs of the user,
- transverse cutting of the foil.
10 kg
Solution
Invert the roll. Foil must be faces to the
container.
Change the sealing film roll or container.
Increase the temperature
Leave the cover closed longer.
Invert the matrix.
Fill gaps and insert new silicone strips
Adjust the position of the strip.
Connect the device to the power supply
and turn it on.
Contact with authorised service.
Contact with authorised service for
knife replacement.
EN
9
Advertenties
Inhoudsopgave
