Advertenties
Beschikbare talen
Beschikbare talen
We recommend PROXXON collet chucks for optimal true
running.
Using the machine
Important!
Always wear protective goggles when using the
machine.
Never use damaged grinding wheels or bent shafts.
1. Switch on machine at switch 4 (Fig. 1) and set the
appropriate operating speed at button 1 (Fig. 1).
Optimum grinding results are achieved through uniform
speed and not by applying excessive pressure.
Small cutters/bits = high speed,
Large cutters/bits = low speed.
2. When cutting or engraving, hold the machine as if it
were a pen (Fig. 3), being careful not to occlude the
vent slits.
3. For roughing down, grip the machine as if it were a
hammer (Fig. 4).
Disposal
Please do not dispose of the device in domestic wa-
ste! The device contains valuable substances that can
be recycled. If you have any questions about this,
please contact your local waste management enter-
prise or other corresponding municipal facilities.
Care and maintenance
When finished using the machine, unplug it and remove
any dust cling ing to vent slits.
Note:
EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
In sole responsibility, we declare that this product
conforms to the following directives and normative
documents:
• EU EMC Directive 2004/108/EC
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 06.2009
• EU Machinery Directive 2006/42/EC
DIN EN 60745-1 / 01.2010
Date: 09.08.2013
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with
the signatory.
FBS 240/E
28472
- 7 -
Advertenties
