Listing to Tape
General operation
Cassette playback:
Stop and ejection:
Fast forward:
Remark
-
Make sure the direction is correct when inserting the tape into the system.
-
There is some searching noise can be heard and the system cannot perform normal playback function during fast forward
mode.
This is recommended to take out the cassette tape from the system every times after listening and don't leave the cassette tape
-
inside the system when not under playback mode.
Aux-in connection
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) cassette player, iPod, etc. To this system via a cord
with 3.5mm diameter jack plugs (not supplied). Connect one end of this cord to the headphone jack of the external device and the
other end to the aux-in jack (2) at the side of the unit. Then press Phono/Aux button (24). Start to playback your external device to
enjoy your music.
Line out connection
You can connect the system to your whole hi-fi system by connecting the line out socket (37) to the auxiliary input socket with a RCA
cable (not included).
Set to cassette function by pressing Tape button (23) and the system will start the playback
automatically after inserting of cassette tape
Press the "Tape forward/eject" button completely inwards and the cassette tape will be ejected though
the cassette door cover. The "Tape forward/eject" button will keeping at lowest height position.
Press the "Tape forward/eject" button half inwards during Playback mode, the tape winding forward
direction. The "Tape forward/eject" button will keeping at middle height position.
Slightly press the "Tape forward/eject" button again to resume normal playback. The "Tape
forward/eject" button will resume to the highest position.
PLAY
FAST
FORWARD
M_NR540 / English
EJECT
Instruction Manual
7