Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Language options (only available in
DMR110)
There are eight language options available in the radio:
English, German, Italian, French, Dutch, Danish,
Norwegian, and Polish.
1. Press Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Language" shown on the display. Press the Volume/
Tuning Control/Select knob to enter the setting.
3. Rotate the Volume/Tuning Control/Select knob to
choose your desired language. Press the Volume/
Tuning Control/Select knob to confirm your setting.
Brightness control
The backlight of the display can be adjusted.
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Backlight" shown on the display. Press the Volume/
Tuning Control/Select knob to enter the setting.
3. Rotate the Volume/Tuning Control/Select knob to
choose to enable or disable the backlight function,
then press the Volume/Tuning Control/Select knob to
confirm the setting.
System reset
If your radio fails to work correctly, or some digits on the
display are missing or incomplete, carry out the following
procedure.
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Factory Reset" shown on the display. Press the
Volume/Tuning Control/Select knob to enter the
setting.
3. Rotate the Volume/Tuning Control/Select knob to
choose "Yes". Press the Volume/Tuning Control/
Select knob to confirm the setting and a full reset will
be performed.
Software version
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"SW Version" shown on the display. Press the Volume/
Tuning Control/Select knob to view the software
version installed in the radio.
Micro USB port for software upgrade
Software updates for your radio may be available in the
future.
As software updates become available software and
information on how to update your radio can be found at
Makita website.
How to play other audios
CAUTION:
Unplug this apparatus before connecting other audios.
• There are 2 AUX IN sockets. AUX IN 1 is located on
the front panel, and AUX IN 2 is located in the battery
compartment.
• Connect a stereo or mono source (i.e. iPod, MP3, or
CD player) to either AUX IN 1 or AUX IN 2 by audio
cord.
10
All manuals and user guides at all-guides.com
• Repeatedly press and release the Band button until
• Never use gasoline, benzine, thinner, alcohol or the
Power requirements
AC power adaptor
Battery
Frequency coverage FM 87.50 - 108 MHz
DAB/DAB+ Channel block
Compatible standard DAB (DMR109)
Circuit feature
Loudspeaker
Output power
Input terminal
Antenna system
Dimension (L x W x H) in mm
Weight
"AU1" or "AU2" is displayed, then AUX function is
activated.
MAINTENANCE
CAUTION:
like. Discoloration, deformation or cracks may result.
SPECIFICATIONS
DC 12 V 1A, center pin positive
Cluster battery: 7.2 V - 10.8 V
Slide battery: 10.8 V - 18 V
DAB/DAB+ 174.928 -
239.200 MHz
DAB (Band III) 5A-13F
DAB/DAB+ (DMR110)
3 inches 8 ohm
7.2 V: 0.5 W X 2
10.8 V:1.2 W X 2
14.4 V: 2.2 W X 2
18 V: 3.5 W X 2
3.5 mm dia. (AUX IN1/AUX IN2)
DAB/FM: soft bended rod antenna
280 x 163 x 302
4.0 kg (without battery)
Advertenties
Inhoudsopgave
