Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
BEFORE USING FOR THE FIRST TIME
Carefully unpack the Griddle and remove all packaging materials.
Place the non-stick Griddle on a clean, flat working surface.
NOTE: Some countertop and table surfaces, such as Corian® and other surfaces, are not
designed to withstand the prolonged heat generated by this Griddle. We recommend placing a hot
pad or trivet under the Griddle beforehand to avoid possible damage to the surface. Be sure the
sides and back of the Griddle are at least 4 inches away from any walls, cabinets, or objects on
the counter or table.
Before first use, see Hints For Care and Use of Non-Stick Surface and Care & Cleaning
Instructions sections of this Instruction Manual.
Before cooking in the Griddle for the first time, wash the non-stick Griddle in mild dishwashing
soap,wipe and allow to dry.
NOTE: The Griddle (without the temperature control probe) is dishwasher safe.
Insert drip tray into rails under the Griddle's side, positioned directly under the grease drain.
Turn the temperature control knob on probe to OFF position and attach securely in place.
Coat the non-stick surface with vegetable shortening before heating. If necessary, remove excess
oil with paper towel.
HINTS FOR CARE AND USE OF NON-STICK SURFACE
To avoid scratching the non-stick surface, do not stack objects on the Griddle.
Use medium to low heat for best cooking results. Very high temperatures can cause discoloration
and shorten the life span of any non-stick surface. If higher temperatures are necessary, preheat on
medium heat for a few minutes.
Use only nylon, plastic or wooden utensils with care to avoid scratching the non-stick surface. Never
cut food on the griddle.
Remove stubborn stains with a plastic scouring pad and mild dish washing liquid; DO NOT USE
STEEL WOOL.
OPERATING INSTRUCTIONS
Turn temperature control probe to the OFF position.
Plug the temperature control probe securely into Griddle's control probe socket.
Plug cord into any standard 220-240V AC wall outlet.
IMPORTANT: ALWAYS PLUG CORD INTO GRIDDLE
FIRST, THEN INTO WALL OUTLET.
Preheat Griddle for approximately 5 minutes before cooking.To preheat , turn the temperature
control to desired
Temperature. The indicator light on the temperature control probe will illuminate as soon as the dial
is rotated. The light will go out once the selected temperature has been reached.
NOTE: During cooking, the light will go on and off indicating that the Griddle is maintaining proper
temperature.
CAUTION: GRIDDLE SURFACES ARE HOT DURING
USE
When cooking bacon of foods containing large quantities of grease, it might be necessary to check
Advertenties
Inhoudsopgave
