Inhoudsopgave
Advertenties
• The battery must be charged for at least 5 to 8 hours during the first charge.
Note: You can use the device when it is being charged. In this case, the battery may take longer
to charge fully.
Precautions to be observed for the charging of the battery :
• To charge the battery, use only the adapter sector provided with your device. Do not use any
other power supplies or electrical devices.
• The sector socket to which the appliance is connected must be installed near the
equipment and should always be easily accessible.
• Always wait at least 5 seconds after turning off the device before restarting it. Switching the
device off and back on immediately may damage the electrical circuits.
• Do not disassemble the battery. Do not throw the battery into fire or water. Do not load
the battery if the ambient temperature exceeds 45 ° C.
• For repair or replacement of the battery, contact a technician qualified.
• Battery life depends largely on how you use it. Do not expose the battery to temperatures
below 0 ° C or above 50 ° C. Its operation could be altered.
• Significant electromagnetic interference or electrostatic discharge
maycause malfunction or loss of data. If the device does not work
correctly, reset the smartphone or unplug the adapter
outlet area, and then reconnect it.
4. Switching the mobile phone on and off
To switch the mobile phone on, press the On/Off button located on the
mobile phone keypad for 3 seconds.
If the mobile phone is switched on, press for less than a second on the
button to put the device into standby mode. Press it again to leave
standby mode.
To switch off the mobile phone, press the On/Off button for 3 seconds until a
menu appears, then touch the Off button and confirm.
5. Locking/unlocking SIM cards
Your SENIOR is a dual SIM mobile, it allows you to call with two
subscriptions from the same device. There are two slots for two SIM cards.
• When you start your mobile, it will invite you to enter successively
the PIN code of your two SIM cards. (SIM1 then SIM 2).
• The emergency call feature allows you to call a number without
having to enter the PIN code.
6. Locking/unlocking the phone
To unlock the keyboard :
• Press the Unlock button at the top left and then press the button *
(star).
To lock the keyboard :
• Press the Menu button at the top left and press the button * (star).
You can set the screen lock by adding a password.
CAUTION : Forgotten or lost password, PIN code blocks your mobile phone. In case of forgetting
or loss, the product warranty does not happen for such negligence. Indeed, even a reset does not
can not solve this problem. As a precaution, write down your password.
PASSWORD: _________________
14
7. Making and receiving calls
NOTE : It is impossible to make or receive a call on the two SIM cards at
the same time. For example, if you are on a call on the SIM 1 line, those
trying to contact you on SIM 2 will automatically be diverted to voicemail.
Making a call :
• Dial the number of your choice and press the button
• Choose SIM card 1 or SIM 2, then press ok to launch a call.
• Once the call has been launched, press the arrows to adjust the
volume of the call.
• When you want to end a call, press the button
Receiving a call :
• When a call is received, press the button
• When you want to end a call, press the button
General Settings
1. Profiles
This function allows you to switch your mobile in different modes :
general, silent, meeting, or outside.
2. Phone settings
• Time & date : Set the time, set the date, set the date format, the time format and update
the time settings.
• Schedule power on/off : Program the ignition or extension of the mobile.
• Language : Select the display language for the mobile phone.
• Preference Input Methods : Enable or disable automatic word input when entering an SMS.
• Display: Change the display settings of the screen,
• Dedicated keys : Change the shortcuts of the directional keys.
• Flight mode : Disconnect the device from the network.
3. Security Settings
This function allows you to change the mobile lock settings.
4. Dual SIM settings
This function allows you to choose SIM1 or SIM 2.
5. Connectivity
Allow to configure the APNs.
6. Factory Settings
You can cancel the settings you have set. The default security password is the 1122.
Bluetooth
You can enable Bluetooth via the Menu button.
• Press the menu button and scroll down until you see the icon
Locking buttons
• Press ok and press On or Off
and Unlocking
Once Bluetooth is activated, the icon
You can transfer data, such as music, to any other device using the Bluetooth. Find the device and
receive / transfer the data. The data received is automatically saved in the directory.
.
.
.
.
Receive Call
button
.
appears on your screen.
Hang up
button
15
Advertenties
Inhoudsopgave
