Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
86D
INSTALLATION
Fastening of the device
Fasten the oven with the two
Figure 6: Installing and tightening the oven 86D into place
fixing strips (Figure 3 (3)),
which have been screwed
onto base (4 universal
screws, 5x16 mm). Make
sure the strips are securely
6
fastened!
Lift the oven onto the fixing
strips so that the back
screws (4) slide into its
grooves (5). Tighten the
screws in the front (6) (2 DIN
933 A2 M5x16 screws)
using a 10 mm fork wrench.
4
5
Connections
Figure 7: 86D connections.
1. Exhaust gas hose. The exhaust gas pipe 1028 of the oven is
insulated by using a jacket tube 1030 . A combination lead-through is
used for the removal of exhaust gases, at which the jacket tube is
fastened to the outermost pipe of the lead-through.
6
2. Lamp and thermostat connector
3. Lamp and thermostat connector (PCB)
4. Control panel
5. Power cord
2
6. Fuel hose
Tighten the hose clamp
1
3
4
5
Solenoid valve
Brown
Black
490048D
3 / ENGLISH
Advertenties
Inhoudsopgave
