Operating Conditions - Toya VOREL 81108 Oorspronkelijke Gebruiksaanwijzing

Pneumatische slijpmachine

Inhoudsopgave

Advertenties

Beschikbare talen

Hazards arising from vapors and dust

Dust and fumes caused by using a pneumatic tool can cause bad health condition (such as cancer, birth defects, asthma and/or inﬂ ammation of the

skin). There are necessary: a risk assessment and implementation of appropriate control measures in relation to those risks. The risk assessment

should include the eﬀ ect of dust created by using tools and the possibility of excitation of the existing dust. The air outlet must be aimed to minimize

generating dust in a dusty environment. Where dust or fumes are created, priority should be to control them at the source of their emission. All

integrated functions and equipment for collection, extraction or reduction of dust or fume should be properly operated and maintained in accordance

with manufacturer's recommendations. Wear suitable respiratory protective equipment, in accordance with the instructions of an employer and in

accordance with the requirements of hygiene and safety. Service and maintenance of the pneumatic tool should be carried out according to the

recommendations of the manual, this will minimize the emission of fumes and dust. You should select, maintain and exchange inserted tools according

to the manual, to prevent increase of and dust. Treatment of certain materials can cause fumes and dust, that produce a risk of explosion.

Noise hazard

Exposure, without any protection, for high noise levels can cause permanent and irreversible hearing loss and other problems, such as tinnitus

(ringing, buzz, whistling or humming in the ears). It is necessary to perform the risk assessment and implement appropriate control measures

in relation to those risks. The appropriate checks, performed in order to reduce the risk, may include activities such as: application of insulation

materials to prevent the "ringing" of the workpiece. Use hearing protection in accordance with the instructions of employer and in accordance with

the requirements of hygiene and safety. Service and maintenance of the pneumatic tool should be carried out according to the recommendations

of the manual, to avoid the unnecessary increase of noise level. If the pneumatic tool has a muﬄ er, you should always make sure that it is correctly

mounted when you use the tool. Select, maintain and replace worn inserted tools according to the recommendations of the manual. This will allow

to avoid the unnecessary increase in noise.

Risks of vibrations

Exposure to vibration may cause permanent damage to the nerves and blood supply to the hands and arms. You should stay away from the

screw driver sockets. You should wear warm clothing when working at low temperatures and you should keep your hands warm and dry. If you

experience numbness, tingling, pain or skin whitening in the ﬁ ngers and hands, you should discontinue the use of pneumatic tool, and then inform

your employer and seek medical advice. Operation and maintenance pneumatic tool according to the recommendations of the manual, will allow to

avoid the unnecessary increase of vibration. Do not use worn or ill-ﬁ tting caps, because it can cause a signiﬁ cant increase in the level of vibration.

Select, maintain and replace worn inserted tools according to the recommendations of the manual. It will allow to avoid the unnecessary increase of

vibration. Where it is possible the covering assembly should be used. If it is possible, you should subpart the weight of the tool in a rack, tensioner

or equivalent. Hold the tool, with light but a ﬁ rm grip, taking into account the required reaction forces, because the risk from vibration is ususally

much larger, when the grip force is higher. An improperly mounted or damaged inserted tool can cause an increase in vibration.

Additional safety instructions for pneumatic tools

Air under pressure can cause serious injury:

- always shut oﬀ the air supply, drain hose of air pressure and detach tool from air supply, when it is not in use, before changing accessories or

performing repairs;

- never direct the air stream at yourself or anyone else.

Hose hitting can cause serious injury. You should always check for damaged or loose hoses and ﬁ ttings. Cold air should be directed away from

the hands

Every time when there are used universal screwed connection (claw couplings), you should apply the protecting pins and connectors against the

possibility of damage to the connections between the hoses and between the hose and tool. Do not exceed the maximum air pressure speciﬁ ed

for the tool.

Never carry the tool, by holding it by the hose.