Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB/US
Operating instructions
6.
TECHNICAL DATA
Function description
Safety feature
Accelerator Bar
Technical data
Model: Bristle Blaster
Electric 230 V | 50 Hz
®
Model: Bristle Blaster
Electric 230 V | 60 Hz
®
Model: Bristle Blaster
Electric 120 V | 60 Hz
®
No-load speed: 3200 min
Noise/vibration information
The A-weighted noise level of the tool is typically:
Sound pressure level 82 dB (A); sound power level 93 dB (A). Wear hearing protection!
The typical weighted acceleration is 2.8 m/sec².
Warning: The two carbon brushes must be replaced together. To reduce the risk of injuries, electrical shocks and
damage to the tool, it is important that you never submerge the tool in liquid, and that liquid can never enter the tool
from the outside.
Volt AC
Double insulated housing
The Bristle Blaster
Electric has a double insulated housing. Double insulated housings are manufactured with two
®
separate layers of protection for the electrical insulation or have twice the width insulation between the user and the
electrical tool. The Bristle Blaster
electrical cable or to be plugged into an earthed socket. For this reason this tool is equipped with a plug that makes
it possible to use extension cables that do not need to be earthed. However the double insulation does not replace
the usual safety regulations that must be followed on the usage of this tool. This insulation is intended to provide
additional protection to protect you from injuries in case of possible electrical damage inside the tool.
22
Handle
| Net weight: 2.3 kg | Colour of the ring: orange
-1
Ampère
Electric, which is equipped with this insulation system, does not need an earthed
®
Rear housing
Switch
Bristle
Blaster Belt
®
Double insulated housing
Bristle Blaster
Fan
On
Off
RoHS
Electric
®
Advertenties
Hoofdstukken
Inhoudsopgave
