Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Usage
1
Switching on the lamp
Push the plug completely into the mains socket.
2
Enjoying the light
The recommended duration of treatment is maximum 12 minutes. We recommend selecting a shorter
radiation period to start with. However, the skin of some people may show an over-sensitive (e.g. with
extreme redness, blistering, itching, heavy sweating) or allergic reaction to heat radiation, even when the
lamp is used correctly. If symptoms are not relieved after 6 to 8 applications, stop using the device and
consult your doctor.
3
Important instructions
The distance between the infrared lamp and the radiated part of the body should not be less than the
following:
at least 32 in (80 cm)
Always use the protective eyewear supplied during usage. The protective eyewear corresponds to the
requirements of EN 171:2002 and serves to protect the eyes against infrared radiation.
CAUTION: Never look directly into the infrared light without protective eyewear.
Basically,
examine the radiated section of the body regularly. Discontinue radiation immediately if any signs of an
over-sensitive or allergic reaction appear and consult a physician.
4
Switching off the lamp
Pull the mains plug from the socket.
CAUTION!
The lamp is hot after being used. Let the lamp cool off first long enough before you put it away and/or pack it up!
Please note that the mains cable must not be wound round the infrared lamp either for storage or when in use.
8. Changing the infrared lamp
The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and changing
the infrared heat lamp.
Please note that only infrared lamps of the original type may be used as replacements.
Appliance
Replacement infrared lamp (type)
:
SIL 16
Infrared PAR 38 (150 W)
Warning
• Do not touch the infrared lamp or unscrew it when it is connected to the mains.
• Unplug the device, to avoid the risk of electrocution.
• In the interest of environmental protection, do not dispose of the device in haousehold waste.
9. Cleaning and maintenance
The unit should be cleaned occasionally.
Important
To avoid odours caused by fluff and dust, we recommend regularly cleaning the device as follows:
• The device must be switched off and allowed to cool and the mains plug pulled out before cleaning and
changing the infrared heat lamp.
• Ensure that no water penetrates inside the unit!
• Do not wash the unit in a washing machine!
Clean using a damp cloth, to which you can apply a little detergent if necessary.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the
unit. The unit must be operated only when it is completely dry.
• Do not use abrasive detergents and never immerse the unit in water.
Specifications
:
:
230V ~ 50 Hz
10
Item number:
616.51
Advertenties
Hoofdstukken
Inhoudsopgave
