Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
Error code
Root cause
Single number
Out of order
E01
Low water protection
E02
Overcurrent protection
E03
Phase loss by wire
disconnected or bad
connection.
E06
Overvoltage protection
E07
Low voltage proection
E05
Rotor blocking protection
TROUBLESHOOTING
Trouble shooting
Pull out the Plug.
Wait until the display on the LCD is off.
Replug in and restart the pump.
Fill water.
Pull out the Plug.
Wait until the display on the LCD is off.
Replug in and restart the pump.
Check and make sure the plug in good
connection to the power source.
Make sure and fix power source in accor-
dance with the proper volatage supply.
Make sure and fix power source in accor-
dance with the proper volatage supply.
Check and make sure the rotor/impeller
is not blocked by any dirt. Pull out the plug
and wash and clean the rotor/impeller part.
Wait until the display on the LCD is off.
Replug in and restart the pump.
85
Advertenties
Inhoudsopgave
