10. Lay the appliance on soft foam packaging or similar material. Remove both
adjustable feet
the lower hinge
lower hinge.
11. Unscrew the lower hinge axis and install it on the hole of the reverse side.
Tighten into position. Fix the lower hinge on the opposite side with the
screws.
12. Replace the lower hinge to the left side and fix it with screws. Replace
the front feet board to the other side and fix it with the screws. Install the
adjustable feet.
PLC265WH / SL 4/3 op.indd 85
and front feet board
on the bottom of the appliance and then remove the
Washer
Note: Washer maybe stuck on the lower door.
. Unscrew the screws
that fix
85
7/3/2022 10:37 AM