Advertenties
Beschikbare talen
Beschikbare talen
Do not connect the shower hose
shut-off valve, always connect the shower hose with
the provided diverter
Before wall mounting, check that the wall can
take the weight of the product. If in doubt, ask in a
specialist shop.
CAUTION! WATER DAMAGE! Check the
m
installation area for the presence of hidden
water pipes before drilling the holes for the wall
bracket
and wall fixing part
[
5 ]
pipe and metal detector.
Examine the wall before installation and choose
suitable installation fixings. We have supplied
fixings suitable for an ordinary solid masonry wall.
˜ Mounting
Tip: For fittings with ¾" (26.4 mm) connection, use
an adaptor with ¾" (26.4 mm) inner thread and
½" (21 mm) outer thread, available in DIY store or
bathroom shops.
Please refer to fig. A‒G.
Notes:
The length of the shower bar
the desired length before drilling.
Fasten hose connections and converter hand-tight.
˜ Operation
Use the diverter
[
11 ]
head
and hand shower
1 ]
[
Adjusting the hand shower
Adjust the height of the hand shower holder
using the adjustment knob.
Adjust the angle at which the hand shower is tilted
by using the hand shower holder
Water-saving insert:
The water-saving insert
water. This may have an effect on how your
continuous-flow water heater works. If the flow of
water is too low, your continuous-flow water heater
will automatically switch off.
Diverter function:
Press the switch on the diverter
corresponding function (overhead shower or hand
shower).
directly to a
[
15 ]
.
11 ]
[
i.e. using a
[
13 ]
is adjustable. Set
2 ]
[
to switch between shower
.
[
19 ]
:
[
19 ]
.
10 ]
[
reduces the flow of
[
18 ]
to select the
[
11 ]
˜ Cleaning and care
Clean the product with a soft, damp cloth and use
a mild cleaning agent if necessary.
Remove the limescale on the product by using a
commercially available limescale remover. Please
follow the directions for using your cleaning agent.
˜ Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
˜ Information
˜ Potability of mains water
Find out about the potability of your mains water
supply. Your local water authority or water supply
company will be able to inform you.
The following general recommendations
apply to the potability of the water from
your pipework:
Let the water run freely for a short time if it has
been stagnating in the pipework for more than
four hours. Do not use any of this stagnant water
in the preparation of food or for drinking. This
applies particularly as far as babies and infants
are concerned. Failure to observe this advice may
result in risks to health. Fresh water can be readily
distinguished from stagnant as fresh water is
noticeably cooler.
by
10 ]
[
Do not use stagnant water from chromium-plated
pipework for the preparation of food or for
drinking or for personal hygiene if you are allergic
to nickel. This water may contain high quantities of
nickel and trigger an allergic reaction.
Do not use water from lead pipework for preparing
food or drink for babies or infants. Do not use it
for preparing food or drink during pregnancy.
Lead dissolves in drinking water and is particularly
damaging to the health of babies and young
children.
GB/IE/NI
7
Advertenties
