Advertenties
Beschikbare talen
Beschikbare talen
1. Loosen the two screws A with the supplied Allen key.
2. Adjust the depth of the arm support to the desired
position. Make sure that the black end plugs B are
always visible.
3. Adjust the inclination angle of the arm support cup to
the desired position.
4. Adjust the angle of the brake handle to the desired
position.
5. Tighten the screws carefully.
Rotating the arm support cups inwards
A
1. Loosen the two knobs A.
2. Adjust the two arm support cups to appropriate
width/angle.
3. Tighten the two knobs A.
1576161-D
4.5 Adjusting the brake handle (Alpha
Advanced)
The brake handle can be additionally adjusted for optional
hand location and function direction.
1. Loosen the screw A with the supplied Allen key.
2. Adjust the fastening device B in height and sideways to
the desired position.
3. Rotate the brake by means of the ball joint to the
desired position.
4. Retighten the screw A.
The brake can be set at a greater angle by twisting
the pipe C in connection with the depth adjustment,
→ 4.4 Adjusting the arm support, page 11.
4.6 Walking
WARNING!
Risk of falling
– Be careful if the wheels stop against an
obstacle, e.g. a kerb.
C
A
Usage
13
Advertenties
Hoofdstukken
