Inhoudsopgave
Advertenties
GB
Operating instructions
The wireless magnet transmitter has 67 million possible fixed codes and
can therefore activate all self-learning intertechno wireless receivers,
including the wireless GONG ITR - 7000 and battery gong IT-9000
(MLR-1105).
Optionally ON/OFF - OFF/ON Activates when opened or closed.
An automatic switch-off time can be selected 0/1 min/5 mins/10 mins.
Screws and double adhesive tape included for easy installation on win-
dows, doors, sliding doors, drawers, display cabinets etc. with countless
possible uses.
Example uses:
Switching a light on or off when opening a door of any kind Activating
the gong when a door is opened.
Turning off the heating when a window is opened.
Safety measure e.g. exhaust control
(the exhaust hood of an open fire can only be switched on if the window
is open to avoid CO poisoning), etc.
With the intertechno IT-MG MASTERGATE, you also receive a push
notification on your smartphone as soon as a window
or door is opened.
At the same time, a siren with a wireless receiver can also be activated as
an alarm system.
GETTING STARTED
Before mounting:
Open the receiver by sliding the mounting plate to the side (Fig. 1)
Remove the battery fuse.
Coding: Adjusting to a wireless receiver (Fig. 2)
Please refer to the wireless receiver's operating manual.
The automatic switch-off feature must be set to 0.
As soon as the receiver is ready to learn, the wireless magnet transmit-
ter's ON signal must be sent.
Either by:
1.) Moving the slider from OFF to ON
The red LED will flash 1x and the encoding will be taught in.
or
2.) sliding the transmitter's magnet when set to ON.
GB
ITM-200
How to erase codes
To erase the encoding, proceed as above, but the OFF signal must be
transmitted.
That means when the slider is moved from ON to OFF the red LED will
flash 2x.
Or by moving the magnet to the OFF position.
Settings
Open or close to activate
Choose between ON/OFF or OFF/ON switching when opened or closed
(Fig. 3b)
If the ON signal should be sent when opened, the slider should be
placed in the ON position.
If the ON signal should be sent when closed, the slider should be placed
in the OFF position.
Switch-off feature (Fig. 3a)
At position 0, it will be turned on/off immediately when opened or
closed.
There are 3 automatic switch-off times available: 1 min/5 mins/10 mins.
The wireless magnet transmitter re-triggers.
This means that if the door is opened and closed during the pre-set time,
the countdown of the switch-off time begins from the last ON signal.
Mounting
The wireless receiver must be function tested before the transmitter
is permanently mounted using the included screws or double-sided
adhesive tape.
To mount with screws, remove the mounting plate from the transmitter
and magnets in advance and mount them in the places provided
(Fig. 4).
To avoid exposing the transmitter to unnecessary vibrations or shocks,
we recommend you attach it to the frame and attach the magnet to the
moving parts (windows).
The distance between the magnet and the transmitter should not
exceed 5 mm.
Slide on the transmitter again. Re-insert the magnet.
›
Operating instructions
ITM-200
›
Advertenties
Inhoudsopgave
