Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
32. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified person in order to avoid a hazard.
33. This appliance is intended to be used in household and similar applications such as: staff kitchen
areas in shops, offices and other working environments; farm houses; by clients in hotels, motels
and other residential type environments; bed and breakfast type environments.
PARTS AND ACCESSORIE
1)
On/Off Switch Pedal
2)
Cord Rewinder Pedal
3)
Power Control Button
4)
Metal Tube
5)
Combi Nozzle
6)
Textile Nozzle
7)
Floor Brush
8)
Hard floor brush
OPERATING MODE
1.
Connect the hose accessories:
Press the adaptors at both side of the hose end, and insert the hose into the hose socket.
2.
Connect the tube to the curved hose end.
Connect the different nozzle tools/floor brush to the tube for different cleaning purposes. The floor
brush has two positions, one for hard and one for soft/textile surfaces – Choose the right one.
3.
Turn on the appliance:
Hold the plug and pull out the cord, then insert the plug into the power socket. Make sure that the
power supply corresponds to the required power mentioned on the rating label. Press the on/off
switch pedal to turn on the power. Adjust it to the required level depending on the cleaning
function.
4.
Turn off the appliance:
After using, press the on/off switch pedal, the appliance is turned off. Pull the plug out of the power
socket; press the cord pedal, the power cord will be drawn in.
5.
To move the appliance from room to room, unplug and carry it by using the handle. Never pull the
appliance by its cord when moving.
MAINTENANCE:
When the dust full indicator turns to red, it is time to clean the dust bag or replace with a new bag. To
do that, please follow the instructions:
a)
Open the front cover by pressing the lock clip.
b)
Remove the dust bag.
c)
Then take a new one, insert it into the bag holder and put it in the slot of the cabinet.
d)
Close the front cover.
NOTE:
1.
The front cover cannot be closed unless the dust bag is installed in right position.
2.
The motor protection filter should be removed and rinsed twice a year or whenever it is visibly
clogged. If the filter is damaged, a new filter should be replaced.
3.
The outlet filter should be cleaned in time. To do that, unclip the outlet grille, shake the filter to
clean any dust accumulated. Then relocate the filter and clip the grille.
All manuals and user guides at all-guides.com
‐ 6 ‐
Advertenties
Inhoudsopgave
