Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
FAULTS
Symptom
Open door alarm is sounding
and the pictogram is flashing.
'dr' is shown in the display.
Door does not open easily.
Note
It is normal for the cooling circuit to make gurgling or expansion noises.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
EN 28
Possible cause
The door has been opened
for too long
The door does not seal
properly (the seal is dirty, the
door is misaligned or the seal
is damaged, etc.).
You are trying to open the
appliance's door just after
you have closed the door.
Then opening the door is
difficult. When you open
the door, cold air escapes
from the appliance and is
replaced by warm air from
the surroundings. As this
air cools a slight vacuum is
created that makes it more
difficult to open the door.
Solution
Make sure that the door is
closed properly.
Make sure that the door is
closed properly. Clean the
door seals. Call the service
centre if the door seals are
damaged.
The situation returns to
normal after a few minutes,
and the door opens easily
again.
Advertenties
Hoofdstukken
Inhoudsopgave
