Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
Carbon filters
Lighting
EN 8
To keep the painted metal filters of this device nice and black,
we recommend cleaning them by hand in soapy water with a neutral
cleaning agent. To dry: place the grease filters with the openings
downwards so that the water can drain out. Black painted and
aluminum grease filters can become dull due to cleaning agents. This is
normal and does not affect operation.
Use carbon filters when the cooker hood is not connected to
an exhaust duct.
1. Open the front panel and remove the grease filter.
2. Centre the carbon filter on the motor frame and turn it to mount it to
the motor frame.
It is necessary to replace the carbon filter every 6 months.
Note
• More noise is produced when carbon filters are used than when the
cooker hood is used with an exhaust vent.
• Carbon filters function optimally at a lower motor speed. For this
reason, avoid the intensive setting.
• Saturation of the carbon filter will eventually occur after more or
less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• Do not wash or reuse the carbon filter. Saturated carbon is not
environmentally friendly, change the filter regularly.
• Dispose of the old carbon filter properly, with non-recyclable waste.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
Advertenties
Hoofdstukken
Inhoudsopgave
