Advertenties
Beschikbare talen
Beschikbare talen
Straightening basics
1. Plug the iron to the mains. It is
not necessary to touch the iron
to judge readiness.
2. Use the +/- temperature controls
to select the setting for the hair
type. You can use the chart below
as a reference. The iron will heat
up very quickly.
3. If using the ultrasonic function,
first fill the reservoir with distil-
led water. Do not fill with any
other liquids (including oil), as
that will clog the unit. To remove
and fill the reservoir, slide the
switch to
and pop it out.
Open the black rubber cap on
the back of the reservoir to fill
with distilled water, then close it.
To replace the reservoir, simply
snap it back into the unit.
4. To turn on the ultrasonic func-
tion, switch to
5. Section dry hair evenly and comb
each section. Position the iron
as far up as you want hair to be
straightened, being careful not to
let the iron touch the scalp. Close
the iron with the hair between
the two plates and gently pull the
iron down to the end of the sec-
tion of hair you are straightening.
6. Repeat this process several times,
if necessary. Let the hair cool be-
fore combing.
Styling tips using straightener
For short, spiky looks, use gel or
spray and hold the sections up
and away from the head while you
straighten.
For smoothing and taming curly
hair or creating a stylish, smooth
bob, use the straightener just on
the ends, leaving the hair wavy at
the roots for lift and body. For this
type of effect, keep the straightener
moving while following the shape
of the hair style.
150°C
170°C
190°C
210°C
230°C
Fill water reservoir
WARNING - Never remove reservoir
when hot. Allow to cool before fil-
ling.
Remove reservoir from unit. Open
.
rubber reservoir cap and fill with
distilled water. Close rubber cap
and snap back onto unit. Turn off
the mist or fill the reservoir with
distilled water when it's empty.
User maintenance
Your iron is virtually maintenance
free. No lubrication is needed. Keep
all vents and openings clear of dirt
and dust. If cleaning becomes ne-
cessary, disconnect the unit from
the power source, let it cool and
wipe exterior with a cloth.
To keep the unit in the best ope-
rating condition, cleaning the
transducer (which is underneath
the water reservoir) after each use
is highly recommended. To clean
8
TEMPERATURE SETTINGS
HAIR TYPE
Fragile, very fine hair
Thin, easy-to-straighten hair
Normal textured hair
Wavy or curly
Coarse, very thick hair
Advertenties
