Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Pica II
Unpack the Label Printer
Lift the label printer on the bottom and remove the printer from the carton.
Check the label printer for transport damages.
Check delivery for completeness.
Scope of Delivery
•
Label printer.
•
Power cable.
•
Cutter unit (printers with option cutter only).
•
Empty core, mounted on transfer ribbon rewinder.
•
Tear-off edge (basic printers only).
•
Dispensing edge (printers with dispenser option only).
•
Product Safety Guide.
NOTICE!
Retain the original packaging for subsequent transport.
Set up the Label Printer
CAUTION!
The label printer and the print media can be damaged by moisture and water.
Set up the label printer only in a dry place protected from sprayed water.
Set up the label printer on a level, vibration-free and air draught-free surface.
Open the cover of label printer.
Remove the foam transportation safeguards near the printhead.
Connect the Label Printer
NOTICE!
Do not use a power cord with an inadequate current carrying capacity.
The label printer is prepared according to standard for a mains voltage of 230 V AC / 50-60 Hz. Optionally a mains voltage can
be used by 115 V AC / 50-60 Hz. The set mains voltage is mentioned on the type plate.
CAUTION!
The label printer can be damaged by undefined switch-on currents.
Set the power switch to '0' before plugging in the label printer.
Insert the power cable into power connection socket.
Insert the plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the label printer are grounded.
Connect the label printer to a computer or network with a suitable cable.
66
English
Advertenties
Hoofdstukken
Inhoudsopgave
