Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Safety warnings
Repairs by a
qualified
electrician only
This electric power tool
complies with the relevant
safety regulations. Repairs
should only be performed
by a qualified electrician.
Otherwise the user may
run the risk of accidents.
If this tool's main power
Important advice
• Do not use liquid or pasty adhesives!
• The glue reaches temperatures of up
to 200 degrees Celsius! You could
burn yourself!
• You could burn yourself. After skin
contact with hot glue: immediately
cool with cold water. Do not try to
remove hot-melt glue from the skin.
If necessary, seek medical attention.
After eye contact with hot-melt glue:
immediately cool for approx. 15 min.
with running water and consult a
doctor straight away.
• The area you are gluing must be free
of grease, dry and absolutely clean.
• Glue marks on clothing cannot be
removed.
• Make sure heat-sensitive materials are
cord is damaged, it must
be replaced by the ma-
nufacturer or its customer
service department or a
similarly qualified person
so as to avoid hazards.
Keep these safety
precautions with
the tool.
suitable for gluing.
• Drips of glue are best removed when
cold.
• Do not pull the glue stick out of the
applicator. Hot glue running into the
applicator may cause damage.
• Do not use in conjunction with highly
inflammable/combustible materials.
• Adhesive joints and glued areas can
be painted or varnished over and can
be taken apart again by heating them.
• Always screw the nozzle tight after
replacing it (approx. 1 Nm).
• Proper operation is only guaranteed
by using genuine STEINEL sticks.
• GlueMatic 1007-LT must only be
operated with the appropriate 85°C
glue sticks.
- 14 -
Advertenties
Inhoudsopgave
