Download Inhoudsopgave Inhoud Print deze pagina

Removing The Grease Filters; Replacing The Carbon Filter - Pelgrim WA300RVS Handleiding

Verberg thumbnails Zie ook voor WA300RVS:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

MAINTENANCE
Grease filters
Carbon filter (WA300RVS)
Lighting
EN 8

Removing the grease filters

Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Pull the grease filter towards you and tilt
it downwards at the front.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
• Remove the grease filters
• Attach the carbon filters to the filter.
• Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
• The hood is equipped with a lighting system based on LED
technology.
• The LEDs guarantee an optimum lighting, a duration up to 10 times
as long as the traditional lamps and allow to save 90% electrical
energy.
• For replacement, contact the technical service.

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Mwa300rvs

Inhoudsopgave