EXTRA FLAT PAR PROJECTOR - 7/9/12/14 x 6W/36x1W RGBW LED
UNPACKING INSTRUCTIONS
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present
and have been received in good condition. Notify the freight company immediately and retain packing material for
inspection if any parts appear to be damaged from shipping or the carton itself shows signs of mishandling. Keep the carton
and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be
returned in the original factory box and packing.
CONTENTS OF THE CARTON
•
1 pc. THINPAR
•
1 pc remote control
•
1 pc. user manual
•
1 pc. power cable
•
1 pc. handle
Please read this manual carefully before operating this product.
SAFETY RECOMMENDATIONS
•
Please read these instructions carefully, they include important information about the installation, usage and maintenance
of this product.
•
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also receives this
instruction booklet.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not
higher than that stated on the bottom of the fixture.
•
The appliance is part of class I and must exclusively connected to an earthed mains outlet.
•
This product is intended for indoor use only!
•
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials
close to the unit during operation.
•
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent surfaces. Be sure
that no ventilation slots are blocked.
•
The minimum distance luminaire from that part of the luminaire or lamp to the lighted object is 0.5m.
•
•Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the fixture at temperatures higher than this.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself.
Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Always use the same type of spare parts.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source while it is on as sensitive persons may suffer an epileptic shock (especially
meant for epileptics)!.
•
The product is for decorative purposes only and not suitable as a household room illumination.
•
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or
his service agent or a similar qualified person in order to avoid a hazard.
•
The light source of this luminaire is not replaceable. When it reaches the end of its life time, the whole unit must be
discarded..
2
MANUAL - THINPAR-7/9/12/14X6W-/36x1W-RGBW
MANUAL
INSTRUCTION
0 . 5 m