Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
a. Power On / Stand-by mode
Press the key [On/Stand-by] to turn on the device or to enter
the "Stand-by" mode. When activated, the bottom part of the
display shows the current time, while the configured operative
mode and the temperature are shown in the upper part. When
in "Stand-by" mode current time, day of the week and the
message: " Stb" are displayed.
NOTE: When the device goes into "Stand-by" mode it beeps
twice for 0.5s.When the device is activated it beeps once for 1s.
Example in "Comfort" mode
Example in "Stand-by" mode
7
b. "COMFORT" and "NIGHT" modes
Two different levels of temperature can be set:
- COMFORT TEMPERATURE is the temperature setting for
'Chrono', 'Fil-Pilote' and 'Comfort'modes;
- NIGHT TEMPERATURE is the temperature setting for the
'Night' and 'Chrono' mode.
The desired temperature can be set pressing the [+] e [ - ]
buttons. The range of configurable temperature is 7°C - 30'°C.
IMPORTANT!
The temperature of "Night" mode must be below to the
"Comfort" mode temperature. For this reason the "Night"
mode temperature can be set to a value between 7°C and the
(configured "Comfort" mode temperature - 0.5°C).
The temperature of "Comfort" mode can be configured in the
whole (Night temperature + 0.5°C) ÷ 30°C range.
c. Operating the device
Press the button [Prog] to select the desired operative mode.
An icon on the display indicates the selected operating mode,
according to the following table.
Cod. 1910000000048 - nv07
1
7
2
6
3
5
4
1
7
2
6
3
5
4
1
7
2
6
3
4
5
Fil-Pilote
Comfort
Moreover, the following special functions are also available:
Window opening function
Key lock function
Fil-Pilote mode
This mode is valid only in the presence of the Fil-Pilote signal,
otherwise the unit will work permanently in "Comfort" mode.
Comfort mode
The "Comfort" stably maintains the room temperature to a
1
7
selected value.To set this operativemode:
2
6
3
5
4
-Press the button [Prog] until the display shows the "Comfort" icon.
-Set the desired temperature through [+] and [-] buttons and
wait until the displayed temperature stops blinking.
Night mode
This mode allows saving energy during the night, or in case of
infrequent use of the rooms in which the device is installed. The
"Night"mode sets a value of temperature below the "Comfort"
Temperature value. It is suggested to set this operating mode during
the night or when the room is not occupied for 2 or more hours.
-Press the button [Prog] until the display shows the " Night" icon
-Set the desired temperature through [+] and [-] buttons and
wait until the displayed temperature stops blinking.
Antifreeze mode
In "Antifreeze" mode the temperature is fixed to 7°C. The device
activates the heating element when the room temperature falls
below 7°C. It is suggested to set this operating mode when the
room is not occupied for several days. Press the [Prog] button
until the display shows the "Antifreeze" icon.
Timer 2H mode
The "Timer 2h" mode can be used to quickly warm up the room
or to speed up towel drying.
-Press the [Prog] button until the display shows the "2h" icon.
The device is activated at the maximum power for 2 hours, up to
a maximum room temperature of 30°C. The "Timer-2h" mode is
automatically deactivated after a period of 2 hours and the device
returns to the operative mode previously set. The user can switch
to another operative mode at any time by simply pressing the
[Prog] button.
Chrono mode
This operating mode allows the user to configure different
temperature values for each hour of each day of the week. The
"Comfort" / "Night" temperatures and the related time intervals
can be thus programmed.
-To activate this function, press the [Prog] button until the
"Chrono" icon is displayed.
- 21 -
Night
Antifreeze
Timer 2H
English
Chrono
Advertenties
Hoofdstukken
Inhoudsopgave
