Download Inhoudsopgave Inhoud Print deze pagina

Belt Clip; Cleaning The Thermal Head; Connecting To The Host Computer/Setting Up The Printer - Epson TM-P60 Gebruikershandleiding

Model met bluetooth-interface
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 27
Buzzer
The factory default is set to On (buzzer sounds) to indicate the following:
Remaining battery charge is not adequate
Host disconnection
Roll paper end
Error
Transmission of status information

Belt Clip

See illustration
You can hang the printer on your belt using the belt clip attached to the back of the
printer. If you want to hang the printer on your neck, you can use the neck strap
provided as an option.
Troubleshooting
No lights on the control panel
Check that the battery is installed.
ERROR LED is flashing or on
The printer temperature may be too high. The printer resumes printing
automatically when the temperature returns to normal.
Make sure that the roll paper cover is properly closed.
Make sure that roll paper is installed.
When the printer power is on, if the ERROR LED and the BATT. LED are on,
the remaining battery charge is not enough for printer operation. The battery
must be fully charged.
When the battery is being charged, if the ERROR LED is on, an abnormality
has occurred. The battery must be replaced with a new one.
Turn off the power, wait several seconds, and then turn it on again. If the
error remains, contact a qualified service person.

Cleaning the Thermal Head

CAUTION:
After printing, the thermal head can be very hot. Be careful not to touch it and
to let it cool before you clean it. Do not damage the thermal head by touching
it with your fingers or any hard object.
Turn off the printer, open the paper roll cover, and clean the thermal elements of
the thermal head with a cotton swab moistened with an alcohol solvent (ethanol,
methanol, or IPA). See illustration
EPSON recommends cleaning the thermal head periodically (generally every
3 months) to maintain print quality.

Connecting to the Host Computer/Setting up the Printer

For connecting the TM-P60 to the host computer using Bluetooth® technology and
for setting up the printer, go to http://pos.epson.com/ to see the TM-P60
Technical Reference Guide.
E
.
F
.
TM-P60 User's Manual (Bluetooth) 9
English

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave