Download Inhoudsopgave Inhoud Print deze pagina

DEFA MultiCharger 1x12A Gebruiksaanwijzing pagina 4

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 24
DEFA Multi/Marine/RescueCharger 1x12A is based on modern switch-mode technology and galvanized divisions. These chargers
represent the latest technology within battery charging and will give the batteries optimum life. It is well suited to battery sizes up to
approx. 150Ah and can maintenance charge the battery for an unlimited time. The charger can stand parallel charging up to 6A parallel
consumption at the same time as it charges the batteries. The charging voltage is temperature compensated with external sensor.
Item number 705463 – Schuko cable for charger
See Picture on page 3. The Picture shows the charge process in a graph with Voltage (V) and Current (I) over time (t)
The LED on the front of the charger shows the charger status:
Green pulse – Charging
Solid green – Fully charged
Red pulse – Error
Read the user manual carefully. Wrong installation can result in damage to the equipment and possible injury. If there are any
uncertainties, please contact DEFA or a qualified person. Fix the charger properly where it is to be installed. See drill guide on page
3. Connect red wire to (+) end black wire to (-) The charger is intended for use with lead/acid, AGM and GEL batteries, but the
battery manufacturers recommendations should always be taken into consideration. The temperature sensor should be placed on
the battery or close to the battery for optimal functionality. The fuse on the charging cable is 15A. The charger has to be installed
with the connectors facing downwards to maintain IP rating 44.
NOTE: To make sure the correct charging voltages the charging cables must not we shortened or made longer.
NOTE: Route the cables onto the contacts on the battery charger (Page 2, picture 1) so that they are straight, in order to prevent
the PlugIn contacts from being bent or twisted (Page 2, picture 2).
• The charge output is protected against short circuiting and wrong connections.
• The charger does not draw current from the battery when the main power is not connected.
• Do not install the charger in a highly flammable environment.
• Do not charge a damaged battery.
• During charging, battery gas which is very explosive can be developed. Take care not to have sparks, open flames, cigarettes or
similar in the vicinity of the battery.
• The acid in the battery is corrosive and harmful. It damages clothes, metal and varnish. In case of spillage and contact with skin,
wash and rinse thoroughly with water and consult a doctor.
• Lead and other chemicals that are used in batteries are toxic. Wash skin and hands thoroughly after working with batteries.
The charger is maintenance free. All batteries should be inspected monthly as a minimum to achieve the best possible safety. The
charging process is in such way that the batteries remain fully charged without further water consumption than normal evaporation.
The guarantee applies to faults in production and materials for 2 years from date of purchase. The customer must deliver the product
back to the place of purchase together with the receipt. The guarantee shall cease to apply if the charger is handled negligently, opened
or repaired by someone other than DEFA or an authorized representative of DEFA. DEFA has no other guarantee than this and will not
be responsible for other costs than those referred to, i.e. no possible additional costs. Neither is DEFA bound by any other guarantee.
4
ABOUT THE CHARGER
AVAILABLE ACCESSORIES
CHARGE PROCESS
INSTALLATION
SAFETY
MAINTENANCE
WARRANTY

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Marinecharger 1x12aRescuecharger 1x12a

Inhoudsopgave