6.
Press the temperature setting button and
the timer button simultaneously for 3
seconds to lock or unlock all functions.
7.
Press the oscillation button to deactivate
the display and switch off all the lights.
Press any button to reactivate.
Difference between
ambient temperature
and set temperature
≥4°C
2-3°C
Before set temperature
is reached
High heating (red
light)
Low heating
(blue light)
HIGH AND LOW HEAT
1.
After the heater is switched on, if the
set temperature is 4°C higher than the
ambient temperature, the heater will
continue to heat at a high level (red light)
until the set temperature is reached.
2.
After the heater is switched on, if the set
temperature is 2-3°C higher than the
ambient temperature, the heater will
continue to heat at a low level (blue light)
until the set temperature is reached.
3.
The table below shows the different steps
the heater shows and takes:
When set temperature
is reached
Low heating (blue
light)
Low heating (blue
light)
If the temperature is
higher than 2°C of the
set temperature
The heater switches off
and the fan runs for 15
seconds
The heater switches off
and the fan runs for 15
seconds
EN
19