Complete The Apsystems Installation Map; Eu Declaration Of Conformity - APsystems DS3D Series Snelle-Installatiegids

Verberg thumbnails Zie ook voor DS3D Series:

Installatiehandleiding (25 pagina's)

Installatiehandleiding (4 pagina's)

Installatiehandleiding (5 pagina's)

Inhoud

pagina van 29

/ 29
Inhoud
Inhoudsopgave
Bladwijzers

Inhoudsopgave

Advertenties

Beschikbare talen

Step 8

Connect APsystems Microinverters to Grid

a. Please install bi-polar circuit breakers with the appropriate rated current or according to local

regulations. These circuit breakers are mandatory for grid connection.

b. Installation of leakage current breakers or AFCI/GFCI breakers is not recommended.

Step 9

AC Extension Cable

When an AC extension cable is required, users can either connect the AC bus cable and AC extension

cable within a junction box or use a pair of male/female AC connectors provided by APsystems as

optional accessories.

① Bus Cable End Cap

② Male/Female AC Connectors

③ AC Junction Box

④ AC Extension Cable

*Customer using AC junction box, please prepare it by yourself.

Step 10

Complete the APsystems installation map

a. Each APsystems Microinverter comes with 2 removable serial number labels.

b. Complete the installation map by affixing the ID label of each microinverter at the appropriate location.

c. The second serial number label can be adhered to the solar module frame. This label will assist in later confirmation of the microinverter's position without the need to dismantle the PV module.

NOTE:

①. The arrangement of the microinverters' serial numbers in the installation map is designed for standard installations.

②. The Installation Map can be found in the appendix on the last page of User manual.

③. When configuring the ECU, use the ECU_APP (accessible through the EMA Manager) to scan the serial numbers on

the map (refer to the ECU instruction manual for further details).

We, ALTENERGY POWER SYSTEM INC.

Building 2, No. 522, Yatai Road, Nanhu District, Jiaxing City, Zhejiang 314050, China declare under our sole responsibility that the product

Product Description: Grid-tied Microinverter

Model No.: DS3D, DS3D-EU, DS3D-H, DS3D-H-EU, DS3D-L, DS3D-L-EU, DS3D-SH, DS3D-SH-EU

to which this declaration relates, is conformity with the following standards and/or other normative documents.

Safety

Health

EMC

Radio

We hereby declare that all essential radio test suites have been carried out and that the above named product is conformity to all the essential requirements of

directive 2014/53/EU (RED).

Title: Director

Address: Jiaxing, China

Date: 2023/12/18

Zigbee Frequency Range：2405MHz - 2480MHz

Zigbee Maximum Power (EIRP)：9.87 dBm