Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Operation
5.1 Charge the Spotlight Presenter
If the following symbol appears on the display:
the battery status is low. Connect the supplied USB charging cable
to the USB-C port (5). Connect the free plug on the USB charging
cable to a suitable USB charger.
A complete charging cycle takes about 2 hours.
Warning – rechargeable battery
• Only use suitable charging devices or USB connections to
charge the product.
• Do not use defective chargers or USB ports and do not
attempt to repair them.
• Avoid storing, charging and using in extreme temperatures
and at extremely low atmospheric pressures (such as at high
altitudes).
• Charge regularly (at least quarterly) during periods of
prolonged storage.
• Do not overcharge the product or allow the battery to
completely discharge.
5.2 Quick start
1. Plug the receiver into an available USB port on your device.
2. After automatic driver installation, the removable data medium
opens
TF card
3. Install the required Spot-Pointer software
4. Switch the Presenter on following successful installation (7).
The following symbol now appears in the task bar:
Note
If the Presenter is switched off, or if the receiver is not connected
to the computer, this will be indicated by a colourless symbol.
3
Dongle
6. Function types
1. Spot illumination mode
2. Magnifying glass function
3. Digital laser pointer
• Pressing the o button (3) twice allows you to toggle between
the function types
• By pressing and holding the o button (3), you can change the
size of the laser pointer, spot and magnifying glass with the two
function keys (1) and (2)
Advertenties
Inhoudsopgave
