Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9. Get started!
To use your Silk'n Motion , follow these steps:
EN
1.
Remove the device and other components from box.
2.
Plug the adapter cord into the device socket and plug the adapter into
an electrical outlet. All energy level indicator lights will turn on, and then
go off.
9.1 Before your first treatment
E
Remove all jewellery before use.
You must decide which energy level is right for your skin, and the area you
want to treat. The device has 5 levels of energy from 1 (the lowest) to 5 (the
highest). For example, you might treat one area at energy level 1, and another
at level 4. For information on energy levels, refer to section "8.2 Energy levels".
To choose the right energy level, test each treatment area separately (refer to
the skin colour chart at the front of this manual).
1.
Press the control button to turn on the device. The level 1 energy level
indicator light will go on.
2.
Place the treatment surface on your skin to deliver one pulse. If you do
not experience abnormal discomfort press the control button again.
This will increase the energy level. Deliver one pulse on a different spot
at energy level 2.
3.
Continue testing at increased energy levels. Use the energy levels
indicated on the skin colour chart. When you find the highest energy
level that is comfortable for that treatment area, you can start your
treatment.
E
Use a lower energy level if you experience any discomfort.
Repeat this test for each part of the body you wish to treat.
14
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
