Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Low Water
• When the water level is low, the icon
permanently on.
• The icons
/
turn off
• If you want to continue steam ironing, refill the
tank of the steam station (A).
(B) Start ironing
• Place the iron on the iron rest (5) or on its heel
rest (15), plug in the appliance and press the on/
off switch on the station (2).
• After switch ON, the related icon in the display (1)
is permanently on.
• At the same time the icon
will start to blink until steam is ready. This steam
setting is suitable for garments like cotton and
linen. Note: during the blinking in the display, the
steam function is deactivated.
• Once the conditions have been reached, the icon
will stay permanently on.
• The iron will start to heat up: During this, the
temperature control light on the iron (11) turns
on. Once the desired temperature is reached, the
temperature control light switches off.
• Set the desired temperature with the temperature
selector (10). Temperature level 1 (•) is suitable
for synthetics, temperature level 2 (••) for wool,
silk, polyester and temperature level 3 (•••) for
cotton and linen.
• During use, the light is turning on and off
indicating that it is heating up.
• For steam ironing, set the temperature between
temperature level 2 (••) and "max" on the
temperature selector and press the steam button
(13) below the iron handle. Steam will come out
from all the holes in the soleplate. Please do not
set temperature below level 2 (••)
ironing to avoid water drops coming out of the
sole plate.
• For dry ironing, select the temperature most
suitable for the garments to be ironed, then iron
without pressing the steam button (13) or
precision shot button (12). Take care that after 10
minutes of dry iron, the steam station turns into
„stand-by" mode.
• The unique round shape of the 3D eloxal
soleplate ensures best gliding results on difficult
parts (e. g. buttons, pockets and tough wrinkles).
• Double trigger: Press twice the steam button
(13). There will be a steam emission for a few
seconds. To stop this function, press the button
(13) again.
• Vertical steam: The iron can be used as well for
steaming hanging clothes (B).
DLB231614_5712811691_IS5022_UI_INT_AUNZ.indb 9
Note:
is
When starting the ironing session or when you have
not used the steam function for some time, the
steam still present in the supply hose will condense
into water. This may cause some spluttering in the
appliance and a few drops of water may come out
from the soleplate.
ECO Function
• For ironing with lower steam press the ECO
• Lower steam is suggested for most delicate
• From 2nd switch on, the appliance works based
in the display (1)
(C) Precision shot
• Press the precision shot button (12) completely
• Steam is coming out of the tip area of the iron
• To stop this function just release the button (12).
• If you don't press it down completely, some
(D) Stand-by
The system (steam iron and steam station) will turn
into the stand by mode to have a power
consumption reduction. When the system is going
into the stand-by mode, the icon
for steam
It is activated:
• after 10 minutes without pressing the steam
• after 10 minutes if the icon
To turn the system ON again, the ON/OFF button
(2) has to be pressed. Before start ironing again,
wait until the temperature control light (11) has
turned off.
After ironing
• Press the On/Off button to turn off the appliance
• Unplug and let the appliance cool down before
• Empty the water tank.
• For models with lock system, lock the iron.
button (3) and the icon
on.
garments like silk, wool and synthetics.
on the latest set function. To return to the normal
steam function press the ECO button again.
down to activate it.
only.
steam may also come out from the rear steam
holes in the soleplate.
button (13).
tank is not refilled and if there is no steam
emission.
(2).
storing.
turns permanently
is blinking.
is activated, water
9
21.11.14 15:57
Advertenties
Inhoudsopgave
