UK: INSTRUCTION MANUAL
3. CHANGING THE GAS CYLINDER
•
Turn off the unit completely. Be careful the gas appliance could be hot.
•
The gas cylinder shall be changed in a well-ventilated location, preferably outside, away from any
sources of ignition, such as naked flames, pilots, electric fires and away from other people.
•
Follow the instructions supplied with the gas cylinder and gas regulator.
•
To ensure a safe connection of a new gas cylinder to your appliance please follow the instructions in
the section 'Connecting your gas grill to a gas cylinder' .
•
If gas pressure drops or the gas will not light, check if there is gas left in the cylinder. If there is gas left
in the cylinder the injector on the appliance might be blocked.
4. CLEANING & MAINTENANCE
•
Visually check the general condition of the appliance and clean it on a regular basis.
•
Ensure the appliance has cooled off completely before cleaning.
•
Use a wire brush, steel wool or a scouring pad to clean the griddle.
•
Interior surfaces of the gas grill housing cover should also be washed with hot soapy water.
•
The drip tray (5) should be cleaned regularly.
•
Periodically check the burner to see that it is free from insects and spiders which may block the gas
system.
•
Clean the venturi tube on the burner very carefully, checking to see it is free from obstructions. We
recommend that you use a pipe cleaner to clean the venturi tube area.
Venturi tube
•
Do not manipulate with any parts sealed by the manufacturer.
•
WARNING: Any modification of the appliance may be dangerous.
5. STORAGE
•
Ensure the appliance has completely cooled down.
•
Disconnect the gas cylinder before you store the appliance away. Keep both the appliance and
cylinder in a dry and well-ventilated place, safe from dust and dirt, and away from heat and direct
sunlight.
If you are not able to rectify any fault following the abovementioned instructions, contact the dealer
or Outwell Customer Service.
Outwell Customer Service
e-mail: info@outwell.com
Tel.: +45 70 22 85 00
6
7