Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Inspect the HumidX/HumidX Plus
1. Check daily for any signs of damage or blockages caused by dirt or
dust.
Notes:
• HumidX/HumidX Plus cannot be washed.
• When HumidX/HumidX Plus is not being used, store it in a clean, dry
location.
• HumidX/HumidX Plus must be replaced 30 days after opening.
Cleaning the AirMini tube
Refer to your AirMini user guide for cleaning instructions.
Cleaning the vent module
1. Clean and check the vent module daily.
2. Wash in warm water using a mild liquid detergent.
3. Clean with a soft bristle brush paying particular attention to the vent
holes
4. Rinse well under running water. Shake to remove excess water and
allow to air dry out of direct sunlight.
5. Check that there is no dirt or dust in the vent holes.
Note: Do not wash in a dishwasher or washing machine.
Cleaning the mask cushion, headgear and frame
After each use: Cushion
Weekly: Headgear and frame
1. Soak the components in warm water with a mild liquid detergent.
2. Hand wash the components with a soft bristle brush. Pay particular
attention to the vent.
3. Thoroughly rinse the components under running water.
English
9
Advertenties
Inhoudsopgave
