Advertenties
Beschikbare talen
Beschikbare talen
MONTAGE
Figure 1 and 2 present measuring and installation process of two-pole tent with walls. In
the case of higher or lower number of poles, proceed similarly with each pole.
1. Pull out all the components and check that the contents of the bags are in
accordance with the list of components.
2. Set the base of the pole on a flat surface and attach it with 460 mm pins to the
ground.
3. On the base of the tube, fasten the belt of the instrument to measure arms.
4. Using the instrument, mark the spots where you want to insert 450 mm
anchors. In the case of tents with two or more poles, mark the first spot (1)
with a string along the center-line of the poles (A, B, C) and stretch it into
a triangle by receiving the second spot (2). Measure further spots by shifting
the corner of instrument's triangle (1) on the previously inserted anchor (2),
while the second corner of the measuring triangle (2) will set out the next spot
for the anchor (3).
5. The instrument to measure the distance between the poles has strings with
stripes. To measure the distance between anchors and poles, use the strings
with wheels.
6. Insert 450 mm anchors in the designated spots
7. After measuring and inserting all the anchors, fold the pole (poles). Note that
the string to pull the roof in, runs in the middle of the pole.
8. Cover the folded pole with a roof.
9. Insert the piece of string sticking out of the pole to the base of the tube.
10. Pull out the string from the bottom, lean it against the reel and enter the end of
the string to the hole in ratchet mechanism.
11. Check if the ratchet mechanism is in „lock" position. The ratchet secures the
winch against release
12. Put the „cap" on the pole. Through the holes in the „cap" thread the ears of
roof's crown. Fasten the hooks with strings to the ears.
13. Embed the pole in the pipe.
14. Buckle up the arms of the tent by using fences, to previously measured and
inserted anchors.
15. Roll the winch to lift the roof.
16. Lift the roof up to about 3/4 of the height of the pole.
17. Buckle up the walls to the fences supporting the arms of the roof.
18. Pull up the zippers.
19. After zipping all the walls, lift the roof by rolling the winch until you sense
resistance. Secure the ratchet with PVC belt.
8/52
Advertenties
