Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Fireplace User Guide & Safety Instructions for electric LED Fireplaces
DESCRIPTION
a. Air outlet
b. Grid
c. Mantel
d. Control panel
INSTALLATION AND IMPORTANT NOTES
Remove all packaging materials. Check that all necessary parts are present; in the case of damaged
•
or missing parts, please contact your specialist dealer immediately.
Before using for the first time, check whether the connection values of your power supply
•
correspond to the data on the type plate.
The device must not be used in areas where dangerous and easily flammable materials, f.e. fuel,
•
thinner, paints and varnishes can be stored.
Do not place the fireplace directly below a wall socket.
•
The air inlet or outlet of the electric fireplace must not be covered to avoid overheating.
•
WARNING: To avoid overheating, the chimney must not be covered.
•
Do not place this electric fireplace directly on carpets or other floor coverings to avoid discoloration
•
caused by the heat.
Do not use the electric fireplace in the immediate vicinity of a bathtub, shower or swimming pool.
•
Do not touch the power plug with wet or damp hands.
•
Before cleaning and when the device is not in use, pull the mains plug out of the mains socket.
•
Do not connect the device to a damaged mains socket.
•
Do not insert any objects into the interior of the device and make sure that no foreign objects enter
•
the device. This can lead to electric shocks, fires, or damage to the device.
Do not move the device during operation.
•
Do not use this fireplace with a programming switch, timer, separate telecontrol system, or any
•
other device that turns the heater on automatically as there is a risk of fire if the heater is covered
or misplaced.
This device is not intended for use by persons (including children) with limited physical, sensory or
•
mental abilities or lack of experience and knowledge, unless they are supervised by a person
responsible for their safety or have been instructed in the use of the device.
Make sure that children have no opportunity to play with the device. If the power cord of this device is
damaged, it must be replaced by the manufacturer or its customer service department or a similarly
qualified person in order to avoid hazards.
This device is intended for use in the home or for similar applications, primarily the electric fireplace is
used for decorative purposes. The fireplace is not suitable for installation in vehicles and machines.
To avoid danger due to unintentional resetting of the thermal shutdown, the chimney must not be
operated via an external switching device, such as a timer, or connected to a circuit that is switched on
2
Stand: 03/2022
Version: 1
Advertenties
Inhoudsopgave
