Inhoudsopgave
Advertenties
BASE FIXING KIT INSTALLATION
The kit mod. 969-9326 enables the pump to be
fixed at the base.
Open the package containing the feet and respec-
tive screws.
Insert the three grub screws in the three feed from
the rear, as shown in the diagram, and screw them
in ensuring that they do not protrude from the
other end.
Use the Allen key supplied for this purpose.
Turn the pump upside down
!
CAUTION
Before overturning the pump, remove the protec-
tion screen, if fitted.
Insert the three feed as shown in the figure, bear-
ing in mind that the position must be as indicated
in the figure.
For the feet to the pump by tightening the previ-
ously inserted grub screws with the Allen key.
Turn the pump the right way up. Fix the pump to a
base by using the three screws provided (M4
thread) in the holes in the three feet.
31
TECHNICAL INFORMATION
87-900-860-01(E)
Advertenties
Inhoudsopgave
