Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Channel 17
Prism Rotation
Prism / Gobo
Channel 18
Rotating Macros
Channel 19
Channel 20
b. Channel Function in 8-Bit Protocol
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
c. DMX512 Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDP575MHS20FL. Multiple VDP575MHS20FLs can be linked through serial linking. The linking
cable should be a two-core screened cable with XLR input and output connectors.
d. DMX512 Chain with Termination
e. Occupation of the XLR Connector
How to turn the controller line from 3-pins to 5-pins (plug and socket):
VDP575MHS20FL_v3
0
128
192
0
16
Pan Fine
0
Tilt Fine
0
Pan
Tilt
Pan / Tilt Speed
Reset - Lamp on / off
Colour Wheel 1
Colour Wheel 2
Prism Wheel
A DMX terminator is recommended for installations where the DMX cable has to run a
long distance or is in an electrically noisy environment (e.g. discos). The terminator
prevents corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120Ω resistor between pins 2 and 3, which is then plugged into
the XLR output socket of the last device in the chain.
Please see illustrations.
127
No rotation
191
Forward rotation from slow to fast
255
Backwards rotation from slow to fast
15
No macro
255
Prism / gobo macro effect
255
Pan fine 16-bit
255
Tilt fine 16-bit
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
7
Static Gobo
Rotating Gobo
Gobo Rotation
Iris
Focus
Dimmer
Shutter
HQPOWER
Advertenties
Inhoudsopgave
