Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION OF THE BLUE SWITCH
CHARGING THE BLUE SWITCH
The mr Handsfree Blue Switch comes with a rechargeable battery included. Make sure that your Blue
Switch is fully charged before using it. It takes about 3 hours to fully charge the battery.
The Blue Switch offers 2 charging options:
1. Via the cradle with USB cable: connected to your computer
2. Via the cradle installed on the dashboard powered by the car: connected to the cigarette lighter
The red LED indicator will start fl ashing when the charging process begins. The battery is fully charged
when the red LED indicator turns off.
PARTS & FUNCTIONS
See illustration II
1. CENTRAL BUTTON
(= ON/OFF-button and button for Pairing / Answer a call / End a call / Reject a call / Voice dialing /
Redial / 2
call)
nd
Pairing:
•
You are required to pair the Blue Switch with your mobile phone once before using it. Each Blue
Switch has a default PIN-code 0000 for pairing, which is stored in its internal memory. The Blue
Switch must be turned off before initiating pairing.
Press and hold the Central button (1) for 5 seconds until the indicator (3) fl ashes red and blue
alternately. → The headset / carkit is now ready for pairing. → Initiate the pairing process on your
Bluetooth
mobile phone to pair with the Blue Switch. (Refer to the manual of your mobile phone.)
®
→ Select Blue Switch out of the list with found devices on your mobile phone.→ You will be asked
to enter the PIN-code to complete pairing, enter 0000 and confi rm it.
Note:
1. If the Blue Switch is not in pairing mode, your mobile phone won't fi nd the headset / carkit.
Please set the Blue Switch into pairing mode before letting your mobile phone search for the unit.
2. If no pairing is possible for a period of time (approx. two minutes), the Blue Switch will
automatically leave pairing mode. You may need to start all over again.
GB-17
Advertenties
Inhoudsopgave
