Advertenties
Beschikbare talen
Beschikbare talen
Electrical connection
Your washing machine works with 220-240V and 50Hz.
Electrical connections must be carried out by a qualified technician in compliance
with the local safety regulations.
Your washing machine must be properly earthed. We will not be held responsible
for any damage that may occur as a result of usage without correct earth
connection.
Do not use extension leads or multi-sockets.
The appliance must not have an external switching device such as a timer or
connected to a circuit that is regularly switched on and off.
Do not pull the plug out of the mains outlet if there is flammable gas around.
Connecting the hoses
Connecting the water supply hose
1. Attach one end of the hose
to the water inlet on the
appliance and tighten by
hand.
1. Loosen the lock nuts with a spanner.
2. Turn the adjustable feet to adjust the height.
•
Make sure that all four feet are stable
and resting on the floor and then check
that the appliance is perfectly level using
a spirit level.
3. Tighten the lock nuts.
2. Attach the other end of
the hose to the tap and
tighten by hand.
87
Advertenties
