EN
Shutoff delay
This function allows you to temporarily continue
filtering and extracting residual smoke after the
cooking has stopped. The function does not work
if the 24h suction function or the intensive suction
function is active.
Switching on
Briefly press.
X
Activates motor shutoff deferred by 30
minutes.
Display: Alternately displays the speed of the
extraction motor and the time remaining until
motor shutoff. The point at the bottom to the
right flashes.
Switching off
Briefly press.
X
Turns the off the „delayed stop" function
Filter saturation alarm
The alarm tells you when the grease filters and the
odour filters need to be cleaned or replaced (for the
non-washable odour filters).
Activating the alarm „filter saturation"
Depending on the type of control keyboard, the
„Filter saturation" alarm may need to be activated if
your appliance is a recycling
or clean-air type.
Contact Customer Service.
X
Deactivating the alarm „filter saturation"
Contact Customer Service.
X
Resetting the alarm „filter saturation"
When the display shows F6 or FC, motor and
light off.
Long press.
X
Used to reset the filter alarm once it has been
triggered.
Display: Displays FF flashing three times.
VIZIO VERRE
Alarm messages
Display: Displays «FG» which signals the need
to wash the grease filters every 100 hours of
operation.
Display: Displays «EF» which signals the need
to wash the grease filters and replace or wash
the odour filters (according to their type), every
200 hours of operation.
These «FG and EF» signals are only visible
when the motor and the lighting are off.
Function: „remote control".
This function enables or disables the use of the
remote control.
Activating the „remote control" function
Long press.
X
Activates /deactivates the remote control.
Display: Indicates IA. with double flashing of
the point for activation.
Display: indicates IA. with a single blinking of
the point for deactivation
– 16 –