Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Locking and unlocking the keys of the
operating panel
Non-existent function.
X
Lighting control
Main lighting
Switches the lighting on or off at maximum
„
intensity.
Intensity at 50%: short press.
„
Increases the intensity of the light to the
„
maximum
Secondary lighting
Appui long.
X
Diminue l'intensité de l'éclairage de moitié
„
Intensité a 50% : appui long
X
Eteint l'éclairage
„
Extraction control
Extraction start
Briefly press.
X
Turns on the extraction motor at the last speed
„
used.
Display: shows the speed adjustment.
„
Extraction level
Low speeds are recommended for low heat cooking
and for sauces, simmering, etc.
Intermediate speeds are recommended for medium
to fast cooking, grilling and frying.
High speeds are recommended for cooking that
creates a lot fat and vapour.
Increases the speed of the extraction motor .
X
Reduces the speed of the extraction motor.
X
Extraction shutoff
Briefly press.
X
Switches the extraction motor off.
„
VIZIO VERRE
Toggling the intensive setting
The intensive extraction mode is recommended if the
vapours and fumes occasionally become excessive.
The function does not work if the 24h suction
function or the intensive delayed stop function is
active.
Switching on
Briefly press.
X
Activates the intensive extraction mode, even
„
with the motor off, for 6 minutes and then
return to the speed used previously.
Display: displays «HI» and a point flashing once
„
per second at the bottom right.
Switching off
Briefly press.
X
Deactivates the intensive extraction mode,
„
return to the speed used previously .
6 minutes after activation, return to the speed
X
used previously.
Briefly press.
X
Switches off the vacuum motor.
„
Ventilation mode 24 h
This function allows you to remove all the unpleasant
and persistent smells in your room by renewing the
air.
Switching on
Briefly press.
X
Motor off or on: switches the motor on for 10
„
minutes every hour at an extraction speed of
100m3/h for 24h.
Display: Displays «24» and a flashing point at
„
the bottom right, while the motor is running.
Once the procedure is completed: the
„
signalling of the previously viewed display turns
off.
Switching off
Briefly press
X
Turns off the extraction motor and
„
consequently deactivates the 24h extraction
function
The display turns off.
„
– 15 –
or .
EN
Advertenties
Hoofdstukken
Inhoudsopgave
