Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATING THE APPLIANCE
The error indicator may flash and error code 'E' / '10' may appear in the display because
the temperature in the appliance is still too high. The error code will disappear when the
appliance has reached the correct temperature.
Open door alarm
If the door is left open for more than 2 minutes, you will hear an audio signal.
High temperature alarm
The error indicator flashes and the display shows 'E' / '10' when the temperature in the appliance
is too high.
A high temperature can be caused for several reasons:
•
The appliance has been switched on for the first time.
•
The door has been opened for too long or too frequently.
•
The door does not seal properly.
•
Too much fresh food has been put in at the same time.
•
The appliance has been switched on again (for example after a lengthy power failure).
The error indicator will continue to flash as long as the temperature is still too high.
Attention; if after 24 hours the error indicator still flashes, contact the service department.
EN 18
Advertenties
Hoofdstukken
Inhoudsopgave
