Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATING THE APPLIANCE
Switching on the appliance
1. Plug in the power cord.
The temperature is set to 4 °C.
▷
Attention; each time the appliance is switched on again, it takes a while to reach the
correct temperature. As long as the temperature has not yet been reached (and is
therefore too high), the error indicator flashes.
Setting the temperature
1. Touch the function key (several times) to choose a temperature.
▷
The temperature of the refrigerator will be set in the following order:
2°C
4°C
The temperature flashes three times and an audio signal sounds; the set temperature is
▷
confirmed and stops flashing.
The recommended temperature of the refrigerator compartment is 4 °C.
Intensive freezing
This appliance has an intensive freezing function. This function decreases the temperature in
the freezer compartment as quickly as possible. Activate this function 24 hours before you put a
large quantity of fresh food in the appliance.
When the intensive freezing function is selected, the appliance works at maximum
capacity. It may then make more noise for a while.
When the intensive freezing function is selected, the refrigerator compartment also
becomes colder than normal.
Switch on the intensive freezing function
1. Touch (several times) the function key until the corresponding indicator comes on.
The corresponding indicator flashes three times and you will hear an audio signal.
▷
The intensive freezing function is switched on.
▷
EN 16
5°C
6°C
8°C
Intensive freezing
Advertenties
Hoofdstukken
Inhoudsopgave
