Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Warm engine start
§ Move On/OFF switch to "ON" position.
§ Pull the starter rope until the engine start up.
To stop engine
§ Move ignition switch to the "STOP" position.
Top Hopper-front cut
The large sloping front chute of the Top
Hopper is designed to accept leaves and small
garden clippings. Shredding and mulching is
achieved by natural suction of the debris
through the blade chamber.
Do not overfeed and do not feed wet, soggy
material into the shredder as this may clog the
blade chamber and the discharge chute.
Top hopper-back chute
The smaller back chute of the top hopper
accepts medium to larger size garden
clippings.
Shredding and mulching is achieved through
the same action as the front chute. If a finer
type mulch is required, re-feed the mulch
through again until the desired result is
obtained.
Material Push stick
User supplied push stick to push remaining
material into hopper opening.
DO NOT USE HANDS.
10 MAINTENANCE
Warning! Priors to any
engine and switch it off
spark plug wire from
Warning! Unintentional
Warning! Unintentional
start-up can result in
entanglement, traumatic
amputation, or laceration.
may damage the engine,
maintenance, to stop
first.
Warning! Disconnect
the spark plug to
prevent unintentional
engine starting.
sparking can result in
fire.
Caution! Use only
genuine replacement
engine parts. None
compliant parts
Advertenties
Inhoudsopgave
