Advertenties
Beschikbare talen
Beschikbare talen
CONTROLS
Appliance controls
The control panel is shown in figure 10. For reference it is also shown
below:
The control panel is located inside the appliance on the top wall of the re-
frigerator compartment. It allows you to select the temperature setting
according to the following sequence: 2 -> 4 -> 5 -> 6 -> 8 or activate
rapid cooling function (Fast Cool). You can change settings by consecu-
tive pressing the SET button.
Setting 8 The highest temperature inside the appliance
Settings 4 / 5 / 6 Medium temperature inside the appliance
Setting 2 The lowest temperature inside the appliance
The Fast Cool function - enables rapid cooling of food products so they
stay fresh longer. The function will be automatically disabled after 3 hours
or when the temperature inside the refrigerator compartment reaches
2
C. The function may be disabled sooner by selecting the desired tem-
o
perature with the SET button.
Refrigerator door opening alarm: When the refrigerator is open over 3
minutes, the buzzer will buzz. Close the door or press any button to stop
the alarm, but for the latter, the alarm will go off again after 3 minutes.
The control panel is located inside the appliance on the top wall of the re-
frigerator compartment. It allows you to select the temperature setting
according to the following sequence: 5 -> 4 -> 3 -> 2 -> 1 or activate
rapid cooling function (Fast Cool). You can change settings by consecu-
tive pressing the SET button.
(warmer)
(cooler)
- 20 -
Advertenties
